.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return Roundhouse Menu

=========================================

..............Previous Page..............................Next Page If There Is One

=========================================

.........--- N Scale 3D Printed Roundhouse Components ---

The following images will show how all the parts of the roundhouse fit together. I've shown a four stall roundhouse but you could build one up to 29 stalls and the ends but that would be a 360 degree roundhouse so a little impractical. I'm planning on mine being 12 stalls altogether plus the ends which are basically ½ stalls.

That is a lot of printing and a lot of print time. At the moment there are 31 different print files (options). Before getting too far into this I'd print a couple of the parts and/or load them in and see what the print times are for you and if this is a good solution for you.

=========================================

NOTE: I'm using an Ender 3 Pro printer along with Cura for the slicing. I started using the 'Super Quality' setting in Cura but found that the 'Standard Quality' setting was fine for me and the prints are quite a bit faster. I'd experiment a little and see what meets your standards.

.

The image above breaks down the different sections that will be discussed further on the following pages and those pages will have links to the print files for the different sections. I decided to break the print files down into sections as you will see there are a lot of different options for the walls a corresponding print files. To confusing to have them all grouped together. At the moment there are 31 different print files (options).

.

.

.

I left out the doors on two of the stalls. You could leave them all out if you wanted. The doors can be installed with either side out, the side with the bracing or the side with the vertical boards only.

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One