.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

..............Previous Page.......................................Next Page If There Is One

=========================================

…..................................--- N Scale 10 Foot X 20 Foot Wall Sections ---

=========================================

The walls on this page have a center block area that is N scale 10 foot X 20 foot. The 'caps' on the top and sides of the sections represent concrete abutments that would reinforce the wall and they are 1 ½ feet wide. The blocks in the wall are scale 1 foot X 2 foot. I tried smaller but they didn't look right but might work on that in the future.

There is a center wall section that could be used by itself if you only needed a short section of wall. You also have the option of adding 'Right' and 'Left' wall sections to extend the wall in either direction from the 'Center' wall section. They could also be stacked in any order to create a wall of any height.

The following pictures should pretty well describe how these can be used.

You can find all the files to 3D print these on my thingiverse.come account ( HERE ).

.

.

.

.

.

.

.

.

.

The files to print the single sided wall sections above are ( HERE ).

======= Now Double Sided Walls =============

Someone mentioned that having the walls above double sided would be helpful in some situations. So the files are now up on thingiverse.com ( HERE ) for the double sided wall sections that can also be used like above. Here are a couple pictures but hard to show both sides of the wall at once.

The files for the above double-sided walls are up on thingiverse.com ( HERE )

You can find all the files to 3D print these on my thingiverse.come account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One