.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

..............Previous Page.......................................Next Page If There Is One

=========================================

…..................................--- N Scale 10 Foot X 10 Foot Wall Sections ---

=========================================

I felt that having some 3D printed walls for the layout might come in handy so using Fusion 360 I designed some in two lengths for the layout. The ones shown on this page have a center block area that is N scale 10 foot X 10 foot. The 'caps' on the top and sides of the sections represent concrete abutments that would reinforce the wall and they are 1 ½ feet wide. The blocks in the wall are scale 1 foot X 2 foot. I tried smaller but they didn't look right but might work on that in the future.

There is a center wall section that could be used by itself if you only needed a short section of wall. You also have the option of adding 'Right' and 'Left' wall sections to extend the wall in either direction from the 'Center' wall section. They could also be stacked in any order to create a wall of any height.

On the next page you will find wall sections that are 20 feet long if that proves to be a better option and you can mix the 10 foot and 20 foot sections together if needed.

The following pictures should pretty well describe how these can be used.

You can find all the files to 3D print these on my thingiverse.come account ( HERE ).

.

.

.

.

.

.

.

.

.

You can find all the files to 3D print these on my thingiverse.come account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One