.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

...............Previous Page......................................Next Page If There Is One

=========================================

…..................................---- N Scale Rooftop Skylights ---

=========================================

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

Skylights for any flat roof building. You can print three different versions.

The first version has all the windows in for the print. So in effect all windows are in the closed position.

The next version leaves one window out. You can then print a single window and put it in the opening at an angle to represent a window that is open to some degree.

The third version prints with two window opening left blank. Again you can print a couple windows and glue them into the openings at various angles.

Above is an example of the window you can print to put into the openings. I left it a little tight so file the sides slightly and also the opening if needed. Tight lets you put it in the opening and it will stay there while you apply some CA glue or a different glue if so desired.

Above is the skylight that prints with two openings for open windows.

Above you can see a few skylights with windows in place and ready for glue next to the freight transfer building that you can also print. The middle one was a bad print and I cut one window opening out with a knife and inserted a window. Since the two openings to the left of it are also not printed well I could of done the same there. Also if the building you are using these on is suppose to appear abandoned I'd cut out parts of windows to look like the building was not in use and abandoned.

The backside of the skylights is suppose to be corrugated roofing with the ribs one foot on center.

A direct link to print files on thingiverse for the skylight ( HERE ) .

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One