.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

...............Previous Page......................................Next Page If There Is One

=========================================

…...---- N Scale 6 Foot High Plate Girder Bridges ---

=======================================

You can find the print files for these bridges on my thingiverse account ( HERE ).

-------------------------------------------------------------------------------------------------------------------------------------

Here is some info on some 6 ft high plate girder bridges of different lengths that you can print along with the links to the print files. These are all double track and are in N scale lengths of 32.5 ft. (2.5”), 40 ft. (3”), 50 ft. (3.75”) & 80 ft. (6”). The 80 ft. and maybe the 50 ft. might not be found in real life unless there was an additional support midway under the bridge?

One 6 foot high span was used above by the tunnel portal and some others of a different length were used at the top of the two supporting towers. More pictures of those ( HERE ). You can also find print file links for the Warren Truss roadway bridge ( HERE ).

The following will provide more info on the different spans.

.

.

.

At this time there are some abutments that a straight with ‘winged end’s the sweep in the same direction. If you need to change that angle one way or the other you could probably cut them off…..file them to a different angle….and glue them back together.

.

You can find the print files for these bridges on my thingiverse account ( HERE ).

You can find a couple hundred other items that you can print on my website ( HERE ).

=========================================

…...........................................Next Page If There Is One

.....................................Next Page If There Is One