.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

...............Previous Page......................................Next Page If There Is One

=========================================

….....................................................----- Wire Clamps ---

=========================================

These are different wire clamps that can be used to hold the wiring for an electrical project.

..

.

.

The flat clamps come in different center section widths.

.

.

I had the best luck printing these on a raft as shown in the pictures above. The clamps easily snap off of the rafts and they keep them all together so work well all around. The files are for one clamp so use Cura or your slicing program to print any number at once that you need.

You can find the files to print this on my thingiverse account ( HERE ).

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

=========================================

…...........................................Next Page If There Is One

.....................................Next Page If There Is One