.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........... Return to Building UP's Canyon Division Menu

=========================================

...............Previous Page.............................Next Page If There Is One

=========================================

…..............................--- N Scale Stacks of Lumber ---

=========================================

Been working on the sawmill design so I could work on the scenery in that area once I know how much space it is going to take up. A sawmill produces lumber so worked on that also.

These are stacks of 2 x 4's, 2 x 6's, 2 x 8's, 2 x 10's and 2 x 12's in stack lengths of 8', 12' and 16'. The stacks are roughly 4 feet wide by 4 feed high. The stacks can also be printed with or without some loose boards on the top of the stack.

I printed these with my resin printer as some of the detail is probably to small for a filament printer but might work.

.

.

.

There are three missing stacks above as those stacks/prints came off their supports during the print so will need to reprint them at some point if I want them.

The next images show the stacks as designed using Fusion 360.

.

.

.

.

.

I was able to get all of the stacks on the build plate of the AnyCubic Photon M3 but 3 failed during the print when they came off their supports (see image further up this page).

You can find the print files for the 2 x 4 stacks ( HERE ).

You can find the print files for the 2 x 6 stacks ( HERE ).

You can find the print files for the 2 x 8 stacks ( HERE ).

You can find the print files for the 2 x 10 stacks ( HERE ).

You can find the print files for the 2 x 12 stacks ( HERE ).

Lots more items you can print on my site ( HERE ).

To be continued............

A link to this whole build ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One