.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return Roundhouse Menu

=========================================

..............Previous Page..............................Next Page If There Is One

=========================================

.............--- Roundhouse Side Walls ---

For the side walls there are a couple options. You need two of the following on each side wall and it doesn't matter which is towards the front or back of the roundhouse.

Above we see the wall with two sets of windows and all the windows are closed. Further down the page you will see an option for partially open windows.

There are two options for a wall section with a freight delivery door in the side where parts could be dropped off at the round house. Above the door is to the right and ...

….. this option has the freight door to the left. If you want to show some of the upper windows open cut them out and print the windows further down the page ( 7-Single 12 Pane Window.stl ) and glue them into the openings.

If you want a wall section with no doors or windows use the one above.

Here is the option for a wall with partially open or closed windows. It will print with no windows in the center of the window frames. Print four of the 4 of the 8 pane windows shown next windows separately and insert them into the openings either in the closed position or placed in such a way to show a window hinged open to some degree.

Note: I print the windows one at a time in 'Super Quality' with Cura.

Print the 8 pane window above to use in the wall section missing the window for partially open windows.

Note: I print the windows one at a time in 'Super Quality' with Cura.

Use these if you want to have partially open windows in the wall sections with the large delivery doors shown further up the page.

Note: I print the windows one at a time in 'Super Quality' with Cura.

.

Note that there are two options not in the photos above. File 1-Side Wall Windows.stl where the wall is printed with all the windows in (you don't have to glue them in) and 4-Side Wall No Windows.stl where the wall has no windows. Similar to the back wall section shown next.

The roundhouse only uses four of these side wall sections and there are more than four options so take you time and think about which ones will work best for you.

=========================================

The names of the print files are shown on the images above and you can find the print files ( HERE )

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One