.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

...............Previous Page......................................Next Page If There Is One

=========================================

…..........---- 10 N Scale Steel Girder Bridges ---

….........---- Also a few Abutment Options ---

=======================================

These are steel girder bridges in different heights and lengths. 6’ high in 32.5’, 40’, 50’ & 80’ lengths. 8’ high spans in 40’ and 80’ lengths and 10’ in 40’, 80’, 92’ and 105’ lengths. There are also a few options for abutments.

I designed some of them …....

….. for the high trestle shown above on the layout. The following is pictures of some of them but not all of them.

All were designed with the non-commercial version of Fusion.

.

I still find it hard to believe that a $200 printer can produce this fine detail.

.

Bridges were designed with ME code 55 track in mind. If you print these for other track leave comments on thingiverse as to the results please.

.

You can find the print files for the above bridges ( HERE ).

=========================================

…...........................................Next Page If There Is One

.....................................Next Page If There Is One