.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........... Return to Building UP's Canyon Division Menu

=========================================

...............Previous Page.............................Next Page If There Is One

=========================================

… …...........................................................--- Fascia – Pt. 2 ---

============================================

Well got half the 60 feet of fascia done in one day and thought I could finish up in a second day but....

…. after about 3 hours and only 3 pieces up stopped for the day. I wasn't sick but no energy.

Worked on some other stuff and a couple days later went back to it and found my energy was up again and ….

.

….. finished up the woodworking part of the fascia.

So far I've been happy with the material selection and the construction side of this. For anyone looking at building a layout I would strongly recommend raising the the layout 3 inches above the main benchwork with risers as explained ( HERE ). They make changes to anything that needs to be done now or later very easy. For example putting a switch machine in and having part of the benchwork in the way is not going to be a problem now or ever.

I've used MinWax stains and urethane's a lot on the two sailboats and for furniture and storage units around the house and have good luck with them so used them again for the fascia.

.

.

Finally time to lay cork and track but also need to get wiring in so I can test the track as I lay it.

If you came into the build here you can find the main index for the build ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One