.................................. Return to Sumner's Home Page....

Return to N Scale RR Main Menu........ Return to 3D Printed Objects Menu

=========================================

...............Previous Page......................................Next Page If There Is One

=========================================

…..--......................................---- N Scale Code 55 Board Crossing ---

=========================================

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

This is a crossing that represents using boards in the center and sides of the crossing. It is sized to work with ME Code 55 track.

.

.

.

.

If you are interested in printing the truck above go ( HERE ) and ( HERE ).

If the road's base is at the same height as the bottom of the ties you can use either the shorter approach, shown above, ( file = 3-23 ft Roadway.stl ) or the longer approach ( file = 4-23 ft Roadway-Long Approach.stl ) shown in the next picture.

If the track is on a roadbed like above and the road's base is at a lower level you can use the 'Longer Approach' ( 4-23 ft Roadway-Long Approach.stl).

The print file should end up with this printing on its end. For me it seems to print with more detail that way. I also choose the 'Build Plate Adhesion Type' as 'Raft' in Cura. It comes off the raft easily. Bend the raft back between your fingers until it breaks loose.

Print these outside boards upright like I mentioned above for the center section using a 'Raft' option.

You can use the road approaches shown above or come up with something else.

You can find all the files to 3D print this object and others on my thingiverse.com account ( HERE ).

=========================================

...........................On..............e.........Next Page If There Is One